Effortless Chip and Sludge Cleaning: Cost-Effective Tips for CNC Machine Coolant Tanks!

Traditional way to clean water tank:

Power off → Disassemble the pipeline → Pull out the water tank → Remove the liquid in the water tank → Dig out the impurities in the water tank manually → Push the water tank back to re-connect the pipe → Replenish the water and adjust the concentration.

In addition to the time required for manpower, this process is also time-consuming.
HC FENG chip/sludge removal machine (Foodie) directly suck impurities in the water tank without downtime. Saving the time of disassembling the pipeline, pumping water, pushing back the nozzles, and replenishing water.

It is easy and convenient so that workers will have the higher willingness to clean the coolant tank frequently.

Features:

  1. The upper cover of the filter barrel is made of transparent acrylic. It is easy to visually check whether the filter barrel is full of debris.
  2. Inlet pipe cladding design on upper cover to avoid clogging.
  3. Oil drip pan surrounding the filter to prevent fluid splash while taking out the filter barrel to pour out the chips.
  4. Built-in air gun design. Simply pull out the integrated air gun to clean the filter barrel, eliminating the need to search for a separate air gun and saving valuable time.
  5. The return pipe counterweight is designed to prevent the water pipe from shaking, causing the water pipe to fall out of the tank and splash everywhere.
  6. The pump is easy to maintain. When the pump is blocked, only need to open the door and remove the pipe for cleaning, without removing the sheet metal.