Milling Solutions
Sub topic: HC FENG cutting fluid management solutions help you solve the problems of coolant contamination, poor surface finish of workpiece and short tool life.
Pain point:
- Metal impurities affect processing accuracy
- Insufficient coolant concentration leads to unstable processing
- Cutting fluid contamination shortens tool life
- The recycling of waste cutting fluid is time-consuming and the recycling cost is high.
High-speed milling produces a large amount of chips and sludge. These impurities deposited in the coolant will reduce the machining accuracy and cause surface defects on the workpiece.
Solution:
Foodie can effectively remove metal/non-metal particles and impurities from the coolant, keeping the coolant clean.
Insufficient coolant concentration may lead to decreased lubricity and cooling performance, affecting processing stability and workpiece accuracy.
Solution:
SHUNT: Auto coolant mixing refill system
Automatically provides a certain concentration of coolant to ensure the concentration stability of coolant during processing.
Deteriorated coolant will accelerate tool wear, and frequent tool changes will increase operating costs.
Solution:
BEST-1 Oil-Water Separation System: Separates floating oil and impurities, keeps coolant pure, and effectively extends tool life.
Solution:
BEST-1 cutting fluid purification equipment: Extend the service life of cutting fluid and reduce recycling costs effectively.
Related Products:
BEST-1
Foodie
SHUNT
Customer Performance:：
Performance Case1：BEST-1
Performance Case2：Foodie
Performance Case3：SHUNT